The Woodworking Clamps You Need

A fast clamp provides the added benefit of the changes being able to modify the clamp for one hand by pressing the button. Woodworking clamps are devices that are used to hold objects together while they are being worked to produce shapes, glueing or finishing them. I also have 4, 48” pipes for bigger glue-ups, tabletops and such and a couple short, and 2 16” pipes that sometimes come in handy.

Corner clamps are used primarily in projects requiring right angles, such as building picture frames. Easily apply and adjust inward or outward pressure with these one-handed clamps, which come in a handy set of four. Similar to pneumatic clamps, except these use hydraulic power or pressurized liquid to apply a clamping load. Pneumatic power clamps use compressed air to apply a clamping load. These clamps are used for production runs and machinery.

Parallel Clamp Framing Kit 2

I’m often reaching for them when I am holding a piece with the other hand and just need something I can use to hold it down. These clamps come in sizes ranging from 12″ all the way up to 98″ long. Starting off I went with simple pipe clamps as they were the cheapest option at the time. I also liked them as I had some long glue-ups and they could easily be lengthened to my needs by swapping out the pipes. With that in mind choosing the best https://bestwoodcarvingtool.com/ for your shop is extremely important.

  • Lastly, these clamps are made so that you can easily disconnect them, reverse them and use them as spreaders!
  • These clamps are made with large throats and can hold up to 3 to 4 inches of material.
  • In contrast to what you’ve seen, these clamps actually lift your project up off the table, thanks to their pipe capabilities.
  • A strip of wax paper acts as a barrier between the wood clamp and the wood.
  • A fast clamp provides the added benefit of the changes being able to modify the clamp for one hand by pressing the button.

Although they are kind of annoying in that they fall off way too easily but it is worth the trade-off in the end. These are probably the most inexpensive clamps you can find so if you are often doing thin, long glue-ups then these can be an inexpensive way to add a lot of clamping pressure. With that said I would still recommend these clamps either as a first clamp or just to have as backups for larger glue-ups. These clamps are pretty easy to find at garage sales so they can be had for even cheaper if you put in the time to look. With proper maintenance, quality c-clamp can last beyond the lifetime of the user. Maximizing the life of your clamp means regular, basic maintenance.

Woodpeckers Shop Upgrade Giveaway

In order to product quality work, you will have to invest in a set of clamps. Slender, curvy workpieces tend to slip and slide in regular woodworking vises, so try Richard Chowin’s great alternative. Clamp a bar or pipe clamp in your bench vise, then tighten the clamp to grip the workpiece at each end. Your future masterpiece won’t move a smidgen while you work, and you will have access to all the curves and recesses along its length. This vise also works great for holding more delicate projects for sanding or finishing. We love these clever plywood clamp extenders for when bar clamps are too short to do the job.

woodworking clamps

You can also use wax paper to keep glue off your cauls. There are round, bulky clamp pads in that same face clamp with Milescraft that bring decentralized stress. Although there are many sizes available, this methodology is appropriate for uses it accepts from 2.75-inch stretchy fabrics.

Since then, I pull them out about once a month for a large glue-up. Parallel clamps and pipe clamps are amazing for the simple reason that they support your project at the same distance. Most of the parallel clamps have much bigger feet on them. It might be a little bit hard to balance but they create a great area for you to set your work on. https://bestwoodcarvingtool.com/purpose-and-types-of-woodworking-clamps/ Another common complaint that I hear from time to time is that bar clamps can leave a residue on a person’s project due to the grease and residue on the pipes. If this is a serious concern for you, I’d recommend putting some old rags between your work piece and the pipes to ensure they don’t rub one another as an extra layer of protection.

Leave a comment

Your email address will not be published.